Handwriting

Write with your finger or stylus, and on-device recognition turns the ink into text.

Handwriting turns a full-width canvas into a keyboard. Write a letter or a word with a finger or a stylus, and the keyboard recognizes it on-device and drops it into your text. Full edition only: it runs on Google ML Kit’s digital ink models, which only ship in the full build.

Screenshot pending

The handwriting panel: a writing canvas over a row of abc, space, delete and enter keys.

Opening the panel

Open Handwriting from the toolbar (or the toolbox if you haven’t pinned it) to swap the keyboard for a full-width writing canvas. Under it is a row of four keys: abc, which closes the panel and returns you to normal typing, Space, Delete and Enter. They are ordinary keys, so the space bar’s swipes and the delete key’s repeat work as they do on the letters. You can move them, or add others, in the panel’s layout.

Write anywhere on the canvas. Strokes render live as you draw, and dim to partial opacity while recognition is running. A single tap still counts as a stroke (enough to register a period or the dot on an “i”), so short marks aren’t lost.

If two or more of your enabled languages have a handwriting model, a small chip in the top-left corner shows the active one. Tap it to cycle through the rest. With only one language available, no chip appears.

Fixing a stroke

Two different controls undo ink, and they don’t do the same thing:

Undo last stroke, an icon that appears in the bottom-left corner once you’ve drawn something, removes only the most recent stroke and re-runs recognition on whatever ink remains.
The panel’s Delete key is different: while ink is still waiting to be recognized, pressing it throws away all pending strokes at once rather than deleting already-committed text. It’s the natural “no, not that” reaction mid-word. Once the strokes have already turned into text, Delete goes back to deleting committed characters normally, and it auto-repeats on a hold like it does on the main keyboard.

The panel is a layout

WM Keyboard Tools Handwriting Panel layout

The handwriting panel is a panel layout like the emoji, clipboard, text editing and trackpad panels. Out of the box it is the writing area over an abc, Space, Delete and Enter row. Open the layout editor from Panel layout on the tool’s page (or from Panel layouts in the layouts gallery) to rearrange that row, add keys beside or above the canvas, or give the canvas more or less height. The writing area is a component, and the one the layout cannot lose: a layout without it gets one added back. The language chip, the undo button and the full-screen button stay on the writing area wherever you put it. Each key layout also has a Handwriting tab of its own, so one language can carry a different handwriting panel from the rest.

Before this panel became a layout, its four keys sat in a column down the right side of the canvas. The shipped layout puts them in a bottom row instead, so the canvas gets the full width.

Writing over the whole screen

WM Keyboard Tools Handwriting Full-screen writing

Tap the expand button in the top-right corner of the panel and the canvas leaves the keyboard: it covers the whole screen, see-through, so you write straight over the app and watch each word land in the text field. The keyboard shrinks to a small bar at the bottom with the recogniser’s other readings of the last word (tap one to swap it in), and keys for undo stroke, Delete, Space, Enter, a shrink button back to the panel, and a keyboard button that closes handwriting. It works the same with the keyboard floating. While the canvas is up, the app keeps its full height and never jumps around under your ink.

A see-through canvas has to decide which touches are writing and which are meant for the app. Full-screen writing picks how:

Pen button (the default): a pen button on the bar switches the canvas between writing and using the app. While it shows the pen, every touch on the screen is ink. Tap it and it turns into a hand: now every touch goes to the app underneath (scroll, tap a link, move the cursor) while the canvas stays out of the way. Works with a finger or any stylus.
Stylus (Android 14 and later): a stylus writes and a finger keeps using the app, at the same time, with no button. Start writing with the pen over a text field and Android hands the stroke to the keyboard, which then takes pen ink anywhere on the screen until you stop for ten seconds. This rides on Android’s own stylus handwriting, so Android’s Write in text fields setting for styluses has to be on. It sits with the phone’s stylus settings, and phones that ship with a pen usually have it on already. It works in any app’s text field even with the keyboard closed, since Android starts it from the pen. The row is not shown on Android 13 and older.

The stylus mode only works with a stylus the screen reports as one (S Pen, a Wacom-type EMR pen, a USI pen, most Bluetooth styluses); a finger or a passive rubber-tip pen looks like a finger and goes to the app.

Handwriting as a layout

Chinese, Japanese and Korean have a Handwriting layout of their own, the way Gboard offers one. Turn it on with the language’s other layouts and pick it with the globe key: the writing area takes the place of the letter keys, and a normal bottom row (?123, globe, punctuation, Space, Delete, Enter) stays under it. Ink is read in that layout’s language, with everything below about models, delete and undo working the same. There’s no language chip on it; the globe key changes language. On the lite build the area only says that handwriting needs the full edition.

Handwriting without opening the panel

WM Keyboard Typing Gestures What a swipe does

There’s a second way to write by hand that doesn’t need the panel at all. Turn on Glide typing and a What a swipe does choice appears underneath it. Set that choice to “Handwrite”. A swipe across the letter keys then draws a stroke on the keyboard itself instead of gliding a word. Recognition and insertion work exactly like the panel, and a plain tap still types its key. The default is “Type words”, so this is off until you change it.

Picking “Handwrite” swaps one set of options for another:

Extra time for a dot or a cross appears: default 700 ms, adjustable from 0–1500 ms. Letters like i, j, and t need a second mark after the main stroke. For this long after you finish a stroke, a tap over the letters is folded into that same character, as the dot or the cross, instead of typing the key underneath it. Set it to 0 to turn the leeway off.
The glide-only rows go away: Glide across the spacebar, Ask when a glide is unclear and the four rows under it, Space after a glided word, Backspace removes a glided word and Delay after typing. None of them means anything once a swipe draws ink rather than a word.

If the language you’re typing in has no downloaded model yet, a one-time notice points you at the Handwriting settings screen instead of silently failing.

Downloading language models

WM Keyboard Tools Handwriting Recognition models

Recognition models: one row per enabled language, each with its own download status.

The Recognition models section lists one row per enabled language that ML Kit can recognize, with its own status: not downloaded (with a download button, and the space that model would take), downloading (counting megabytes toward the total), downloaded and working offline (with a delete/trash icon), or download failed. Recognition runs entirely on-device once a model is on your phone, so after that one download the language works with no network connection at all. See network policy for what else does and doesn’t touch the network.

Model sizes vary more than you might expect, so each row shows its own rather than one rounded figure for everything. Bangla installs 24.6 MB, English (US) 25.8 MB, French 26.1 MB, and Chinese only 7.9 MB. Roughly half of that crosses the network, because the files travel compressed and get unpacked on the phone. The numbers come out of ML Kit’s own manifest rather than an estimate, so the progress readout counts real megabytes toward a real total.

You can start a download from the panel too. Open Handwriting in a language whose model is missing and it offers a Download button instead of a canvas. The panel shows the same running total, and that button turns into Cancel while the download is going, so you are never stuck watching it.

On the Play Store build the recogniser itself is an extra part of the app (about 3 MB) that Google Play delivers the first time a model is downloaded. The same Download button covers both: the readout counts the recogniser’s bytes first, then the model’s. Until that part is here the rows cannot say how much a model takes, and the languages list still shows every language the recogniser knows, because that list is built into the app. Direct-download builds carry the recogniser from the start.

The first time handwriting is used after the keyboard starts, the model check and any download wait about ten seconds before anything happens. ML Kit fetches the models through Google’s Mobile Data Download service, and that service sets up its full list of models before it answers anything. On a fresh start WM Keyboard clears the service’s list first, because re-listing models it already knew about could leave every check and every download waiting forever. A model you already downloaded stays downloaded through this, and nothing is fetched again.

Downloads can also take longer than their size suggests, because the service can go quiet for a while before any bytes move. That is the real reason the readout counts megabytes: it tells you whether a download is slow or actually stuck. If nothing arrives for twenty seconds, both the panel and the settings row say so. After ninety seconds of silence the download gives up and clears out what it had already written, so trying again starts fresh instead of rejoining a transfer that already died.

The list of available models isn’t hardcoded in WM Keyboard. It’s read straight out of ML Kit’s own digital ink library, then filtered down to the languages you have enabled. So enabling a new keyboard language surfaces its handwriting model on its own, with nothing WM-Keyboard-specific to configure. The flip side: the catalog of which languages have a model at all only grows when ML Kit itself grows.

A phone that cannot download, or a build with no internet permission, can import a model instead. The Import from a file row under the models lists each language’s files under Get the files: two or three .zip files from dl.google.com, the same ones ML Kit would fetch. Download them on any device, move them to the phone and pick them under Import. See Importing instead of downloading.

If an enabled language has no ink model, it’s called out separately underneath the list: writing in that language falls back to the nearest language that does have one, rather than failing outright. And if none of your enabled languages has a model, the list itself is replaced by a note asking you to add a language on the Languages screen first. A Languages and layouts row at the bottom of the section takes you straight there either way.

Options

WM Keyboard Tools Handwriting Input

Stylus only: off by default. With it on, only a stylus (S Pen or similar) draws on the canvas, and finger touches are ignored completely. Even with it off, a finger touch is briefly ignored right after a stylus stroke, so a palm resting on the screen while you write doesn’t add stray ink.
Automatic space: on by default. Inserts a space between words you write one after another, but never before punctuation, and never next to Chinese, Japanese, Thai or another script written without spaces.
Panel layout: opens the layout editor described in The panel is a layout.
Recognition pause: default 700 ms, adjustable from 300–2000 ms. How long the canvas waits after your last stroke before it sends the word off for recognition. Shorter feels snappier. It can also cut a multi-stroke letter or a Bengali conjunct in half if you pause mid-letter, where a longer wait gives you room to breathe between strokes.

Details & edge cases

Palm rejection happens automatically and isn’t a setting: once the canvas sees a stylus point, it ignores finger touches for 800 ms afterward.
There’s no hover preview, no air-gesture support, and no S Pen side-button handling. The stylus-specific behaviors are palm rejection and the Stylus full-screen mode.
Switching between the panel and full screen throws away ink that hasn’t been recognised yet: it was drawn on the other canvas, at another size.
Auto-capitalization at the start of a sentence only applies when you’re writing in American English with Auto-capitalize on, and never in a password or other secure field. Bangla and other languages without letter case are skipped entirely.
The recognizer only sees the last 20 characters of text before your cursor as context (a limit set by ML Kit itself, not WM Keyboard).
Handwriting has no direct-boot support: neither the panel nor handwriting-by-swipe works before you’ve unlocked your device once after a restart, unlike some other tools. If Power Saving mode is set to drop on-device models to save battery, handwriting-by-swipe is switched back to plain gesture typing until you turn it back on.

Why full only

Digital ink recognition depends on com.google.mlkit:digital-ink-recognition. That library is compiled into the full build and left out of the lite build entirely, rather than hidden behind a toggle. So the Handwriting tool doesn’t appear in the toolbar or toolbox on lite, and the “Handwrite” option of What a swipe does is full-only too. See Full vs Lite if you’re deciding between builds.